Fire-resistant Mounting Foam Penosil PREMIUM FIRERATED GUN FOAM, 750ml

Penosil PREMIUM FIRERATED GUN FOAM B1 fireproof gun foam - quality you can count on.

Professional fireproof foam in a pistol version. The foam is characterized by good adhesion to various building surfaces, low expansion and fast drying time. The fire resistance class meets European standards EN 1366-4 and DIN 4102-1.

Application

• For installing fireproof doors, filling gaps and openings


• Filling and insulating cable and pipe penetrations


• Insulation of central heating systems and water and sewage networks


• Wherever high requirements are placed on fire resistance

Technical data

• Skin formation time 12-16 min


• Shear time (30mm strip): 30-40min


• Complete curing in the joint (+23 degrees C): up to 18h


• Complete curing in the joint (+5 degrees C): up to 24h


• Density: 25-30kg/m3


• Secondary expansion: up to 30%


• Fire class of cured foam (DIN 4102-1): B1


• Tensile strength (BS 5231): 8N/cm2


• Compressive strength at 10% strain: 2.5N/cm2


• Thermal conductivity: 0.034 W/m*K


• Sound insulation index: 60 dB


• Fire resistance class of cured foam EI 15-EI 120; tested in accordance with EN 1366-4 and DIN 4102-1


• Packaging: 750ml

Application conditions

• Air temperature during application +5 degrees C ÷ +30 degrees C. (The best parameters will be obtained at +20 degrees C.).


• Temperature of the can during application +10 degrees C ÷ +25 degrees C, (the best will be +20 degrees C.).


• Before applying the foam, the surface should be cleaned and degreased


• It is recommended to sprinkle the substrate with water for better adhesion and for proper hardening of the foam across the surface


• Foam is sensitive to UV rays, so it should be shielded as soon as possible - passive window installation tapes can be used


• The foam should not be cut off